Mahendra Electrical Works
- An ISO 9001-2008 Unit
is engaged in manufacturing of various types of current transformers,
instrument transformers etc.. Mahendra Electrical Works,
has been persistently following systems to maintain total quality
and have always believed in zero defect products. In more than 2
decades of service to the Electrical industry Mahendra Electrical
Works has been approved by all major Transformer manufacturers,
Electricity boards, Railways and reputed consultants all over the
globe.
Products
manufactured at Mahendra Electrical Works have wide acceptance both
in India as well as International market. Products are manufactured to IS,
BS, IEC, AS, ANSI, Canadian standards. The company has vast expertise in
the design and manufacture of current transformers for metering,
protection and special protection applications.
Product Range:
-
Ring
Type Oil Immersed Bushing CT
Mahendra
Electrical Works
is the established name in manufacturing of Bushing CT's for almost
3 decades. These Cts are used in distribution and power transformers
upto 500MVA capacity and voltage class upto 400kv. We have been
supplying bushing CT's to all major transformer manufacturers in
India like CGL, EMCO, Alstom, Bharat Bijlee, Transformers and
Rectifiers India Ltd., Asea Brown Boveri.
-
Outdoor
Oil Cooled CT
Oil cooled transformers are made for use on various systems ranging
from 11kv to 33kv. the basic construction of the CT is similar to CT
of all voltage classes in that the core is placed in a tank mounted
on top of the bushing and adequate paper insulation is provided on
it. The secondary leads are run through the bushing to the secondary
terminal box placed at the bottom of the bushing.
-
-
Custom
Made Current Transformers
These Current Transformers are specially designed and manufactured
by Mahendra Electrical Works for use in Control Panels, UPS
and Switchgears.
Features: Long lasting, can be designed and moulded as per customers
requirement in different shapes and sizes.
Application: Control panels , Switchgears and UPS
-
-
LT
Bar Primary Tape Wound CT
Features:
Can be designed as per customers requirement to slip on busbars and
cables of higher diameters available in RYB coloured tapes
Customized
mounting arrangements available
Application:CTs for metering protective applications
-
Control
Transformers
During the past 2 decades Mahendra Electrical Works has been engaged
in the development of low reactance transformers for use with
electro-magnetic control circuits. Given below are the salient
features of our standard range of Single phase Industrial Control
Transformers and general Purpose transformers.
A Control Transformer is a transformer which supplies power to
control and /or auxillary equipment not intended for direct
connection to the main circuit. Control transformers are
specifically used to provide control supply voltages for the control
circuits of AC motor starters.
In addition Mahendra Electrical Works also manufactures a
range of general power transformers. These can be of the single
phase version or the 3 phase version with capacities from 1KVA to 50
KVA, system.
-
Wound
Primary LT Resin Cast CT
Features: Long lasting, can be designed and moulded as per
customrers requirement in different shapes and sizes.
Application:Control panels , Switchgears.
-
|